Xylem MultiLab 4010-2 Manual do Utilizador descarregar pdf (Página 65)

MultiLab 4010-2 Settings

ba76142e01 05/2013 65

Setting the calibra-

tion interval

The calibration interval is set to 7 days in the factory.

You can change the interval (1 ... 999 days):

9.2 ORP measurement settings

Settings The settings are made in the menu for measuring settings of the ORP measure-

ment. To open the settings, display the required measured parameter in the

measured value display and press the <ENTER> key. After completing the set-

tings, switch to the measured value display with <M>.

Default settings are printed in bold.

1. Open the menu for measurement settings with <ENTER>.

2. In the Calibration / Calibration interval menu, set the calibration interval

with <><>.

3. Confirm the setting with <ENTER>.

4. Quit the menu with <M>.

Menu item Possible setting Explanation

mV resolution 0.1

Resolution of the mV display

Reset - Resets all sensor settings to the

delivery condition (see section

9.6.1 R

ESETTING THE MEASUREMENT

SETTINGS, page 73).

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 111 112

Sem comentários

Xylem MultiLab 4010-2 Manual do Utilizador Página 65