Xylem TB500 ONLINE TURBIDITY ANALYZERS Manual do Utilizador descarregar pdf (Página 26)

TB500 (2/07)

Rev. 1.0

7.11 Setting the Units

The most common unit is NTU (Nephelometric Turbidity Units) however the instrument

can display in

FNU (Formazin Nephelometric Units). All instruments are shipped from

the factory set in NTU mode. Make a selection using the

t and u buttons then press the

↵ button.

7.12 Ultrasonic Cleaning (Model TB504-WL & TB504-IR)

This allows for a selection menu to turn off the ultrasonic cleaning function if desired. The

default mode is On. Make a selection using the

t and u buttons then press the ↵ button.

7.13 RS-485 Parameters

For instruments manufactured on or after June 2003, the following menus can be used to

modify the RS-485 parameters. These menus will only appear if the RS-485 is enabled

(see 7.1). The default is 8 Bit, no (nOnE) Parity, 1 Stop Bit. Make selections using the t

and

u buttons then press the ↵ button to move to the next menu.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Sem comentários

Xylem TB500 ONLINE TURBIDITY ANALYZERS Manual do Utilizador Página 26